Amulite Automated CO2 XPS Foam Board Line for Insulation, CE & ISO Certified

• Customization: Available
• After-sales Service: Yes
• Warranty: 5 Years
• Model NO.: AM1720
• Product Type: Fiber Cement Board Production Line
• Automatic Grade: Automatic
• Power Source: Electric
• Screw Design: Double-Screw
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Forming Board Style: Hatchek Style and Flow-on Slurry Style
• Asbestos: No Asbestos
• Paper Pulp System: Refinery and Paper Pulp System
• Stacker: Automatic Stacker, Automatic Demoulding Stacker
• Drying Style: Autoclave or Pressing Machine
• Separate Dryer: If Cold Area, Separate Dryer Is Needed
• Edge: Automatic Edge Treatment Machine
• Sanding: Automatic Sanding Machine
• Embossed Style: Embossed Moulds or Forming Board Roller Design
• UV Board: UV Painted Production Line
• Transport Package: Bulk and Wooden Pallet
• Specification: 1220X2440X4MM-30MM
• Trademark: Amulite
• Origin: China
• HS Code: 8474802000
• Production Capacity: 150 Sets Per Year

Product Description

Short Description:

I.Technical Introduction
First,compounding symmetrical1y XPS material with other assistant materialslike nucleant agent and color batch;Secondly put them into hopper of Grade Iextruder by vacuum feeder automatical1y;Thirdly melting and plasticizing resin byspecial1y designed screw symmetrically,at the same time injecting foam agent byhigh pressure and mixing it with melted resin;Fourthly,putting them into Grade IIextrusion system to meit,mix, add pressure and cool again and extruding foam boardby special mould for board, then cooling and forming board by cooling and formingdexiss..kifthly. putting the board into Grade I draw-off system and transporting theminto Grade Il draw-off system by transportation rol1s; Sixthly , cutting waste edge bysaw of both-side and finishing transverse cutting according to set 1ength; the 1ast step,stacking and storage.
 

Electricity Unit:

Main motor Beide Brand (Siemens Standard Motors Ltd.)
Transducer Danfoss or Siemens Brand
AC Contactor Siemens or Schneider Brand Temperature controller meter Omron Brand or Fuji Brand Voltage 380V,50HZ

AM-XPS75P/200 CO₂ XPS Foam Board Production Line

I. Technical Introduction

First, compounding symmetrically XPS material with other assistant materials like nucleant agent and color batch; Secondly put them into hopper of Grade I extruder by vacuum feeder automatically; Thirdly melting and plasticizing resin by specially designed screw symmetrically, at the same time injecting foam agent  by high pressure and mixing it with melted resin; Fourthly, putting them into Grade II extrusion system to melt, mix, add pressure and cool again and extruding foam board by special mould for board, then cooling and forming board by cooling and forming device;Fifthly, putting the board into Grade I draw-off system and transporting them
into Grade  II draw-off system  by transportation  rolls; Sixthly, cutting waste edge  by
saw of both-side and finishing transverse cutting according to set length; the last step, stacking and storage.

II. The Main Material

1> XPS resin

2> Foam agent & assist foam agent 3> Nucleant agent

4> Color batch

5> Other assistant materials

Note: We will provide our customers with material prescription, material type and relative technical documents after signing a contract.

Machine Component

1> Plastic mixer 1 set

2> Grade I extrusion system 1 set

3> CO₂ foam agent injection system 1 set 4> Assistant foam agent injection system 1 set 5> CO₂ flow show system 1 set 6> HCFC Foam agent injection system 1 set 7> Automatic net-exchange system 1 set

8> Grade II extrusion system 1 set

9> Extrusion die head 1 set

10> Calibrating and draw-off system 1 set

11> Transmission and cooling system 1 set

12> Grade II draw-off system 1 set

13> Lengthways cutting system 1 set

14> Horizontal cutting system 1 set

AM-75P/200 CO₂ XPS Foamed Board Production Line

1. Feeding system

2. AM75/44 Twin-screw extruder 1 set

3. CO₂ foam agent injection system1 set

4. Assistant foam agent injection system 1 set

5. Freon Foam agent injection system 1 set

6. CO₂ flow show system 1 set

7. Automatic net-exchange system 1 set

8. Grade II extrusion system 1 set

9. Extrusion die head 1 set

10. Calibrating and draw-off system 1 set

11. Transmission and cooling system 1 set

12.Grade II draw-off system 1 set

13. Lengthways cutting system 1 set

14. Horizontal cutting system 1 set

15> Transverse cutting system 1 set

15. Electricity unit

Model AM-XPS-JR100B

1> XPS foam board crusher device 1set

2> Single screw plasticizing and extrusion device 1set

3> Filter net-changing device 1 set

4> Cooling tank 1 set

5> Cutting pellet machine 1 set

Note: The above proportion of foam agent is just for your reference, the actual data is adjusted according to the demand of raw material and market.



 

1.Q:Are you a manufacturer or a trading company?

A:We are a manufacturer with 36years of experience and an international trade team. We own a 50,000 square meter manufacturing factory and we have about 150 workers.

2.Q:Which loading port?
A:Ports: Tianjin, Qingdao, Shanghai, Lianyuan Port, Shenzhen, Guangzhou, etc.

3.Q:Can you provide customized product?
A: Customized product can be provided according to customer requirements,we can print your LOGO or information on the packaging.

4.Q:What payment method do you usually use?
A:Payment Terms:30% Advance Payment,and balanced before loading.

5.Q:What is the delivery time of your equipment?
A:About 120-150Days.

6.Q:How do you guarantee product quality?
A:We have strict quality control checks in each process. There are test reports of our products. All our products comply with industry standards.

7.Q:Do you provide engineer installation and commissioning services? How long does it take to install and commissioning?
A:Yes, we have a team of 50 engineers around the world responsible for installation and commissioning services. Installation and commissioning takes about 90-120 days.